File:ZX81+35 REV 2.2 built up.JPG: Difference between revisions

Latest revision as of 19:56, 2 July 2017

All components soldered to the board, except part of the Joystick logic (to make debugging the keyboard layout easier)

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:21, 21 February 2016		4,032 × 3,024 (2.91 MB)	Mahjongg (talk \| contribs)	All components soldered to the board, except part of the Joystick logic (to make debugging the keyboard layout easier)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Rollei
Camera model	Sportsline 60
Exposure time	1/25 sec (0.04)
F Number	f/2.8
ISO speed rating	71
Date and time of data generation	07:06, 20 February 2014
Lens focal length	8.5 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
Software used	5M2 V1.01 01/01/2014
File change date and time	07:06, 20 February 2014
Y and C positioning	Co-sited
Exposure Programme	Normal programme
Exif version	2.2
Date and time of digitising	07:06, 20 February 2014
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.6
APEX aperture	3
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Centre weighted average
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	1
Colour space	sRGB
Sensing method	One-chip colour area sensor
File source	Digital still camera
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Scene capture type	Standard
Sharpness	Hard

Revision as of 22:21, 21 February 2016 (view source) Mahjongg (talk \| contribs) (All components soldered to the board, except part of the Joystick logic (to make debugging the keyboard layout easier))		Latest revision as of 19:56, 2 July 2017 (view source) DaveBot (talk \| contribs) (Addig to category)
Line 1:		Line 1:
	All components soldered to the board, except part of the Joystick logic (to make debugging the keyboard layout easier)		All components soldered to the board, except part of the Joystick logic (to make debugging the keyboard layout easier) [[Category:Pictures]]