Buiding up and testing the ZX81+38 revision 1,9: Difference between revisions
Jump to navigation
Jump to search
(start) |
No edit summary |
||
Line 6: | Line 6: | ||
|Contact=mahjongg | |Contact=mahjongg | ||
}} | }} | ||
For those planning to build the ZX81+38, note this kit is NOT suitable for people who are not proficient in soldering. The ZX81+38 is not easy to solder, the design is dense and the solder pads are smaller than in most other designs. Also you will need to have the right tools, including an EPROM programmer. I suggest using the minipro |
Revision as of 14:52, 7 May 2023
Project Building up the ZX81+38 | |
---|---|
A manual on how to build the ZX81+38 | |
Status | Initializing |
Contact | mahjongg |
Last Update | 2023-05-07 |
For those planning to build the ZX81+38, note this kit is NOT suitable for people who are not proficient in soldering. The ZX81+38 is not easy to solder, the design is dense and the solder pads are smaller than in most other designs. Also you will need to have the right tools, including an EPROM programmer. I suggest using the minipro