File:2N3904 bent and cut for easy insertion.jpeg: Difference between revisions

Latest revision as of 14:41, 7 May 2023

Bent the middle pin out, and cut one of the outer pins so pins have different lengths for ease of insertion in PCB

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	14:41, 7 May 2023		2,560 × 1,920 (2.82 MB)	Mahjongg (talk \| contribs)	Bent the middle pin out, and cut one of the outer pins so pins have different lengths for ease of insertion in PCB

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Panasonic
Camera model	DMC-TZ71
Exposure time	1/25 sec (0.04)
F Number	f/3.3
ISO speed rating	400
Date and time of data generation	00:32, 3 May 2023
Lens focal length	4.3 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
Software used	Ver.1.0
File change date and time	00:32, 3 May 2023
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.3
Date and time of digitising	00:32, 3 May 2023
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX exposure bias	0
Maximum land aperture	3.4453125 APEX (f/3.3)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	1
Colour space	sRGB
Sensing method	One-chip colour area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	25 mm
Scene capture type	Standard
Scene control	High gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal