PETDuino in Datasette: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
|Name=PETDuino in Datasette | |Name=PETDuino in Datasette | ||
|Picture=1024px-Commodore-Datasette-C2N-Mk1-Front.jpg | |Picture=1024px-Commodore-Datasette-C2N-Mk1-Front.jpg | ||
|Omschrijving=for my museum PET (CBM4032) I wanted to use a PET2SD floppy disk emulator, but I discovered that due to the fact that this PET has the original BASIC (rev 1,0) it doesn't support | |Omschrijving=for my museum PET (CBM4032) I wanted to use a PET2SD floppy disk emulator, but I discovered that due to the fact that this PET has the original BASIC (rev 1,0) it doesn't support diskdrives, it doesn't have IEEE drivers, so I switched to my CBM8032 which does, but due to it 80-kolumn screen there are almost no kames working on a CBM8032! | ||
at the moment the PET in the national video game museum in Zoetermeer is the - | at the moment the PET in the national video game museum in Zoetermeer is the ZX-81 game that was ported to the PET in 2021. | ||
it can be loaded from the PET2SD using the load"*",8 command. the other working game is a frogger clone. | it can be loaded from the PET2SD using the load"*",8 command. the other working game is a frogger clone. | ||
I decided to solve this conundrum by building a version of the casduino into a defective datasette. | I decided to solve this conundrum by building a version of the casduino into a defective datasette. | ||
Revision as of 22:42, 4 June 2024
| Project PETDuino in Datasette | |
|---|---|
| |
| for my museum PET (CBM4032) I wanted to use a PET2SD floppy disk emulator, but I discovered that due to the fact that this PET has the original BASIC (rev 1,0) it doesn't support diskdrives, it doesn't have IEEE drivers, so I switched to my CBM8032 which does, but due to it 80-kolumn screen there are almost no kames working on a CBM8032!
at the moment the PET in the national video game museum in Zoetermeer is the ZX-81 game that was ported to the PET in 2021. it can be loaded from the PET2SD using the load"*",8 command. the other working game is a frogger clone. I decided to solve this conundrum by building a version of the casduino into a defective datasette. I found a fritzing diagram of a sd card reader for a CBM cassettedeck asa starter, together with the schematic of my previous TZXDuino Pico. | |
| Status | Initializing |
| Contact | mahjongg |
| Last Update | 2024-06-04 |
8 may 2024 Started with a Datasette with an Arduino and Sd-Card
Found a fritzing Diagram of a "casduino" for a C64/PET Datasette. Started with converting the diagram to a KiCad schematic, using the TZXDuino Pico as example, so that I don't need to use a separate SD-card interface board, or 3V3 regulator. this DATASETTE-Duino uses a 2x16 LCD with an I2C backpack..
[[Tapuino bb-r2.png]|1000px]