Assembling RhoCoCo: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
Line 16: Line 16:
I practice I decided I wanted to build up the keyboard first, but quickly ran up to a problem, all the holes for the keys were too small to fit the pins of the keys through, and I had to drill all 400 holes with a 1.5mm drill (through a stack of three PCB's)
I practice I decided I wanted to build up the keyboard first, but quickly ran up to a problem, all the holes for the keys were too small to fit the pins of the keys through, and I had to drill all 400 holes with a 1.5mm drill (through a stack of three PCB's)
The I soldered the keys, and two connector strips to the PCB's.
The I soldered the keys, and two connector strips to the PCB's.
This is the result: [[File:IMG 20190330 205013.jpg]].
This is the result: [[File:IMG 20190330 205013.jpg|800px]].
Farnell only delivered 49 keys, not 50, so I left the middle of the three-key spacebar out for now.
Farnell only delivered 49 keys, not 50, so I left the middle of the three-key spacebar out for now.


Line 22: Line 22:


This is the PCB, with only the card reader soldered to it.
This is the PCB, with only the card reader soldered to it.
[[File:IMG 20190330 212947.jpg|800px]]

Revision as of 21:23, 30 March 2019

Project Assembling a RhoCoCo home computer
IMG 20190328 152503.jpg
This text describes how to assemble a RhoCoCo home computer from two PCB's, ten (socketed) integrated circuits, a dozen connectors and various other parts.
Status Initializing
Contact Mahjongg
Last Update 2019-03-30

We need, two PCB's, the parts from this list: File:RHOCOCO rev 1.8 assembly list.pdf

a soldering iron, and this assembly drawing to locate each part. File:Rhococo rev 1.8 component overview.pdf

In principle we start by soldering the only SMT part to the PCB, the SD-card-connector, this might have been pre-assembled for you. Then we do the resistors, and the diodes by bending them into shape.

I practice I decided I wanted to build up the keyboard first, but quickly ran up to a problem, all the holes for the keys were too small to fit the pins of the keys through, and I had to drill all 400 holes with a 1.5mm drill (through a stack of three PCB's) The I soldered the keys, and two connector strips to the PCB's. This is the result: IMG 20190330 205013.jpg. Farnell only delivered 49 keys, not 50, so I left the middle of the three-key spacebar out for now.

Next up was soldering the SD-card holder, as I was already afraid of, the card holder had two plastic pins, I had no holes for in the PCB. The datasheet of the card holder was very fuzzy about these two pins, and I could not determine if they really existed. Easy solution was to cut the pins off. Fortunately all the other (solder) pins seemed to be placed correctly.

This is the PCB, with only the card reader soldered to it. IMG 20190330 212947.jpg