Assembling RhoCoCo: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
Line 7: Line 7:
}}
}}


We need, two PCB's the parts from this list:
We need, two PCB's the parts from this list: File:RHOCOCO rev 1.8 assembly list.pdf
a soldering iron, and this assembly drawing to locate each part.  [[File:Rhococo rev 1.8 component overview.pdf]]
a soldering iron, and this assembly drawing to locate each part.  [[File:Rhococo rev 1.8 component overview.pdf]]


we start by soldering the only SMT part to the PCB, the SD-card-connector, this might have been pre-assembled for you.
we start by soldering the only SMT part to the PCB, the SD-card-connector, this might have been pre-assembled for you.
Then we do the resistors, and the diodes by bending them into shape.
Then we do the resistors, and the diodes by bending them into shape.

Revision as of 12:20, 29 March 2019

Project Assembling a RhoCoCo home computer
IMG 20190328 152503.jpg
This text describes how to assemble a RhoCoCo home computer from two PCB's, ten (socketed) integrated circuits, a dozen connectors and various other parts.
Status Initializing
Contact Mahjongg
Last Update 2019-03-29

We need, two PCB's the parts from this list: File:RHOCOCO rev 1.8 assembly list.pdf a soldering iron, and this assembly drawing to locate each part. File:Rhococo rev 1.8 component overview.pdf

we start by soldering the only SMT part to the PCB, the SD-card-connector, this might have been pre-assembled for you. Then we do the resistors, and the diodes by bending them into shape.