File:CO2pod prototype outside.png

Size of this preview: 600 × 600 pixels. Other resolution: 819 × 819 pixels.

Original file (819 × 819 pixels, file size: 1.4 MB, MIME type: image/png)

Image of a prototype CO2 pod on top of a brick wall. The CO2 sensor is attached by a ribbon cable and the main board is connected with a PCB.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	15:43, 7 January 2026		819 × 819 (1.4 MB)	Oops (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Exposure time	1/25 sec (0.04)
ISO speed rating	800
Lens focal length	4.25 mm
F Number	f/1.8
Camera manufacturer	Apple
Camera model	iPhone 11
Date and time of data generation	16:37, 7 January 2026
Image height	2,048 px
APEX exposure bias	0
Exif version	2.32
Colour space	Uncalibrated
Flash	Flash did not fire, compulsory flash suppression
Exposure Program	Normal program
APEX brightness	−1.8093479762727
White balance	Auto white balance
Metering mode	Pattern
Image width	2,048 px
Exposure mode	Auto exposure
APEX aperture	1.6959938128384
Scene type	A directly photographed image
Subject area	1,980 1,486 2,179 1,369
Sensing method	One-chip colour area sensor
APEX shutter speed	4.6439283242329
Date and time of digitising	16:37, 7 January 2026
Software used	26.1
File change date and time	16:37, 7 January 2026
Horizontal resolution	28.35 dpi
Vertical resolution	28.35 dpi