Audiocrasher

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.

Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.

Schematic:

Soldered:

ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution: