Verint Nextiva

From RevSpace
Revision as of 19:19, 2 June 2016 by Peetz0r (talk | contribs) (Created page with "We have old analog camera's around the space that have been used in the past but are unconnected now. They do have power and they work! Sk1llz has had a donation from [http:/...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

We have old analog camera's around the space that have been used in the past but are unconnected now. They do have power and they work!

Sk1llz has had a donation from Griffid with some old video encoders. One of them is a 8 channel Verint Nextiva S1708e

Peetz0r, participant at both spaces, re-donated the decoder and tried to make it work. Spoiler alert: it works!


Network config

The thing does not have a web interface. It does have telnet and it streams video over RTP.

DHCP is enabled right now, and it's IP is 10.42.43.92.

Video config

Telnet to the thing, and go (6) Advanced => (1) Video => (X) Input X => (1) Endoder 1 and make sure it looks like this:

***********************************************************
*       Verint Video Solutions S1708e - 10.42.43.92       *
***********************************************************
Video \ Input 8  \ Encoder 1
-----------------------------------------------------------
Parameters:
 1) Target Bit Rate                        : 800 kbits/second
 2) Target Frame Rate                      : 25 frames/second
 3) Minimum Quantizer                      : 2 
 4) Maximum Quantizer                      : 24 
 5) Initial Streaming                      : Enabled
 6) Current Streaming State                : Enabled
 7) Transport Protocol                     : RTP/UDP
 8) Input Filter Mode                      : Low
 9) Noise Reduction Filter Mode            : Low
10) Resolution                             : 4CIF (704x576) 
11) Remote IP Address                      : 10.42.43.45 
12) UDP Data Port                          : 2543 
13) Rate Control Mode                      : CBR (Constant Bitrate)
14) Multiplying factor for Nextiva RC (X100: 150 
15) Target VSIP GUID                       : 00000000-0000-0000-0000-000000000000 
16) Intra Interval                         : 120 
17) Energy Vector (EV) transmission rate   : 0 
18) Compression Mode                       : MPEG4 Compliant Simple Profile
19) Frame Format                           : DeInterlaced Frame
20) Sabotage Detection Filter Mode         : None

Commands:
p) Previous Menu 
***********************************************************
Command: 

Change (11) Remote IP Address to your device (let's say, a laptop running linux) and (12) UDP port to anything.

The led for the chosen input should now be flashing quickly. Preferably green, because that means that the connected input works. But red is okay for testing your config.

Now move over to your linux machine. At first I tried vlc and I even fiddled around with SDP files. Then I stumbled upon https://wiki.london.hackspace.org.uk/view/Project:Verint which barely helped. The next day, I found this mailing list thread and especially this mail.

Then I created this command line:

gst-launch-0.10 -e -v udpsrc port=2543 ! application/x-rtp,media=video,payload=121,clock-rate=90000,encoding-name=MP4V-ES,profile-level-id=1 ! rtpmp4vdepay ! decodebin ! autovideosink

It works!!!