Difference between revisions of "Audiocrasher"

From RevSpace
Jump to navigation Jump to search
(NAND audio crasher)
Line 17: Line 17:
  
 
-Accepts line-ish level or piëzo contact microphone signal on the input.
 
-Accepts line-ish level or piëzo contact microphone signal on the input.
 +
 +
-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example)
 +
 +
  
 
Schematic:
 
Schematic:
Line 31: Line 35:
  
 
[[File:fix.jpg]]
 
[[File:fix.jpg]]
 +
 +
The pot provided is 100k, but that does not really matter. :)

Revision as of 18:01, 18 February 2019

NAND audio crasher

by benadski, made for hackerhotel 2019 through hole soldering workshop

Turns your awkward "Kinderen voor kinderen" collection into nice noise.


Description of this soldering kit:

-Small PCB with 4 jack 3.5mm connectors and potentiometer.

-Turns audio into a squarewave and mixes this with another squarewave.

-Has a gate and CV input.

-Only consumes about 2mA at 5V.

-Accepts line-ish level or piëzo contact microphone signal on the input.

-External control for added functionality. (Connect pin 5 to 6 to shut up CV/Pot controlled modulator for example)


Schematic:

Audiocrasher sch.jpg


Soldered:

Audiocrasher PCB.jpg


ERRATA: PCB layout error, but it's fixed easily. Solder bridge solution:

Fix.jpg

The pot provided is 100k, but that does not really matter. :)