Traffic light: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 3: Line 3:


Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin.
Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin.
Running as /root/tl.pl on "squeezebox-klusbunker" (10.42.66.3). Sends messages to /dev/nr24l01p


== current ==
== current ==
Line 8: Line 10:
Listens on nrf24l01, same channel as rest of infra.
Listens on nrf24l01, same channel as rest of infra.
Command: STPLxxx where x is either '0' or '1' (ascii characters, not binary values).
Command: STPLxxx where x is either '0' or '1' (ascii characters, not binary values).
[[File:Internet_state_stoplicht.jpg]]


== old ==
== old ==

Latest revision as of 13:57, 9 October 2015

Owner: Folkert van heusden


Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin.

Running as /root/tl.pl on "squeezebox-klusbunker" (10.42.66.3). Sends messages to /dev/nr24l01p

current

Listens on nrf24l01, same channel as rest of infra. Command: STPLxxx where x is either '0' or '1' (ascii characters, not binary values).

Internet state stoplicht.jpg


old

Connected to jukebox.

Device: /dev/tl

Serial, 115k2, requires ascii-string ended with cr/lf/cr+lf/lf+rc/and other variations. 3 characters (not binary bytes) that are either 0 or 1. Order: green, yellow, red.

Arduino requires extra seperate power supply or else it'll go in a reboot-loop when switching.