Flashforge AD5X

From RevSpace

Revision as of 20:23, 12 July 2026 by Fluffyredpanda (talk | contribs) (Created page with " = Flashforge AD5X = This page is a work in progress. Please add information if you have used this 3D printer. == Slicer == OrcaSlicer: https://www.orcaslicer.com/ Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop Settings when adding: You can find == WebUI == There is a web interface (Fluidd) available on the printers IP Address: http://<IP-Address> For example you can upload printer files or move the printer head. == Firmware == === ZMod =...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Flashforge AD5X

This page is a work in progress. Please add information if you have used this 3D printer.

Slicer

OrcaSlicer: https://www.orcaslicer.com/

Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop

Settings when adding: You can find

WebUI

There is a web interface (Fluidd) available on the printers IP Address:

http://<IP-Address>

For example you can upload printer files or move the printer head.

Firmware

ZMod

This is 'extra' firmware on top of the original printer. "Z-Mod doesn’t replace the stock firmware — it enhances it". Comes with Klipper updates that the original firmware does not provide. The Zmod firmware also installs Fluidd which enables a WebUI on the printers IP address.

https://wiki.zmod.link/

Retrieved from "https://revspace.nl/wiki/index.php?title=Flashforge_AD5X&oldid=35392"