Flashforge AD5X: Difference between revisions
Created page with " = Flashforge AD5X = This page is a work in progress. Please add information if you have used this 3D printer. == Slicer == OrcaSlicer: https://www.orcaslicer.com/ Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop Settings when adding: You can find == WebUI == There is a web interface (Fluidd) available on the printers IP Address: http://<IP-Address> For example you can upload printer files or move the printer head. == Firmware == === ZMod =..." |
No edit summary |
||
| Line 5: | Line 5: | ||
== Slicer == | == Slicer == | ||
OrcaSlicer: | OrcaSlicer: | ||
https://www.orcaslicer.com/ | https://www.orcaslicer.com/ | ||
| Line 11: | Line 12: | ||
https://www.flashforge.com/pages/flash-studio-desktop | https://www.flashforge.com/pages/flash-studio-desktop | ||
Settings | === Flash Studio instructions === | ||
1. Go to 'Device' Tab | |||
[[File:Flash Studio adding 3d printer screenshot.png|thumb]] | |||
2. Click on the '+' icon | |||
3. Click under Other Device on AD5X | |||
4. A popup will show. It will ask for the printer access code. This will show on the 3D printer itself under "Settings (gear icon) > Network (wifi icon) > Network Mode". | |||
[[File:Screenshot 2026-07-12 223901.png|thumb]] | |||
5. The FlashForge AD5X will now show up under 'Device List' in FlashForge Studio. | |||
== WebUI == | == WebUI == | ||
Revision as of 20:43, 12 July 2026
Flashforge AD5X
This page is a work in progress. Please add information if you have used this 3D printer.
Slicer
OrcaSlicer: https://www.orcaslicer.com/
Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop
Flash Studio instructions
1. Go to 'Device' Tab
2. Click on the '+' icon
3. Click under Other Device on AD5X
4. A popup will show. It will ask for the printer access code. This will show on the 3D printer itself under "Settings (gear icon) > Network (wifi icon) > Network Mode".
5. The FlashForge AD5X will now show up under 'Device List' in FlashForge Studio.
WebUI
There is a web interface (Fluidd) available on the printers IP Address:
http://<IP-Address>
For example you can upload printer files or move the printer head.
Firmware
ZMod
This is 'extra' firmware on top of the original printer. "Z-Mod doesn’t replace the stock firmware — it enhances it". Comes with Klipper updates that the original firmware does not provide. The Zmod firmware also installs Fluidd which enables a WebUI on the printers IP address.
