Flashforge AD5X: Difference between revisions
From RevSpace
Created page with " = Flashforge AD5X = This page is a work in progress. Please add information if you have used this 3D printer. == Slicer == OrcaSlicer: https://www.orcaslicer.com/ Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop Settings when adding: You can find == WebUI == There is a web interface (Fluidd) available on the printers IP Address: http://<IP-Address> For example you can upload printer files or move the printer head. == Firmware == === ZMod =..." |
(No difference)
|
Revision as of 20:23, 12 July 2026
Flashforge AD5X
This page is a work in progress. Please add information if you have used this 3D printer.
Slicer
OrcaSlicer: https://www.orcaslicer.com/
Flash Studio: https://www.flashforge.com/pages/flash-studio-desktop
Settings when adding: You can find
WebUI
There is a web interface (Fluidd) available on the printers IP Address:
http://<IP-Address>
For example you can upload printer files or move the printer head.
Firmware
ZMod
This is 'extra' firmware on top of the original printer. "Z-Mod doesn’t replace the stock firmware — it enhances it". Comes with Klipper updates that the original firmware does not provide. The Zmod firmware also installs Fluidd which enables a WebUI on the printers IP address.
