Difference between revisions of "LED-skirt"

From RevSpace
Jump to navigation Jump to search
m
(One intermediate revision by the same user not shown)
Line 4: Line 4:
 
   |Picture=
 
   |Picture=
 
   |Contact=Noor
 
   |Contact=Noor
   }}==To do==
+
   }}
 +
==To do==
  
- Have six vertical stripes, circles of varying sizes, and 8x8 panel. Figure out layout.
+
* Have six vertical stripes, circles of varying sizes, and 8x8 panel. Figure out layout.
  
- Want side-emitting LEDs along the bottom, but can't find side-emitting LEDs that are also waterproof, and can't put more than 1m of non-waterproof ones in a silicon tube.
+
* Want side-emitting LEDs along the bottom, but can't find side-emitting LEDs that are also waterproof, and can't put more than 1m of non-waterproof ones in a silicon tube.
  
- Diameter of crinoline bottom hoop is 80 cm. Need to add an extra 100+cm of arc length of black paneling and tulle paneling to inner layers.
+
* Diameter of crinoline bottom hoop is 80 cm. Need to add an extra 100+cm of arc length of black paneling and tulle paneling to inner layers.
  
 
==Timeline==
 
==Timeline==

Revision as of 21:12, 30 November 2019

Project LED-skirt
Status In progress
Contact Noor
Last Update 2019-11-30

To do

  • Have six vertical stripes, circles of varying sizes, and 8x8 panel. Figure out layout.
  • Want side-emitting LEDs along the bottom, but can't find side-emitting LEDs that are also waterproof, and can't put more than 1m of non-waterproof ones in a silicon tube.
  • Diameter of crinoline bottom hoop is 80 cm. Need to add an extra 100+cm of arc length of black paneling and tulle paneling to inner layers.

Timeline

2019-11-06 - 2019-11-11

Bought:

2019-11-12 - 2019-11-24

  • Layout of LEDs, waiting for items to arrive.
  • Tested out LEDs under layers and on crinoline.

2019-11-25

  • Took apart seams of inner layers of black skirt to add extra panels to fit over crinoline.

2019-11-26

  • Measured skirt on top of crinoline. Extra panel with bottom arc length of 100+cm.
  • Decided to go with 6 strips of 23 LEDs each. Cut one strip.