LoRa-E5-mini: Difference between revisions

From RevSpace
Jump to navigation Jump to search
Line 20: Line 20:
Seeed studio wiki page:
Seeed studio wiki page:
https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
Where can I find which pin of the microcontroller is connected to which pin of the LoRa RF module?


=== Software ===
=== Software ===
https://github.com/bertrik/lora-e5
https://github.com/bertrik/lora-e5

Revision as of 09:54, 8 October 2021

Project LoRa E5
Arduino on the LoRa-E5 module
Status In progress
Contact bertrik
Last Update 2021-10-08

The plan

This page is about the LoRa-E5 module and getting it to work as a LoRaWAN node with Arduino and the BasicMac stack.

  • replace the original "AT" firmware with Arduino based firmware
  • use the BasicMac library for LoRaWAN
  • use platformio as the build system
  • create some basic examples for use as a LoRaWAN node on TheThingsNetwork

Hardware

The hardware is the LoRa-E5 module from seeed studio: XXX

Seeed studio wiki page: https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/

Where can I find which pin of the microcontroller is connected to which pin of the LoRa RF module?

Software

https://github.com/bertrik/lora-e5