TuxDroidHacking
Jump to navigation
Jump to search
| Project Tux Droid | |
|---|---|
| |
| Status | In progress |
| Contact | gny |
| Last Update | 2024-04-16 |
TuxDroid Introduction
from the Wikipedia page:
Tux Droid is a Linux wireless Tux mascot (210mm × 180mm × 140mm - with lowered wings) with a programmable interface, allowing it to announce events by its gestures and by ALSA driven sound.
TuxDroid harware overview
Front
- USB mini cable to connect the Fish to computer
- TuxDroid Fish – to remote control the TuxDroid from your computer
- IR Remote – reciver behind the eye of the TuxDroid
- Button
- Eye lid – can open and close; remotely controlled from computer
- Eye – blue LEDs behind the eye can light up; remotely controlled from computer
- Beak – can open and close; remotely controlled from computer
- Flippers – can move up and down; remotely controlled from computer
- Body – can turn left and right; remotely controlled from computer
Back
- Volume control of the internal speaker (item 17)
- 3.5mm jack for headphone
- 3.5mm jack for external microphone
- direct connection for firmware upgrade from the Fish
- built-in NiMH battery (4.8V, 750mAh)
- on-off switch for the TuxDroid
- external power jack for the TuxDroid
- built-in speaker
- TuxDroid main board – based on 2x Atmel ATmega88 providing “core” and “audio” modules to controls, e.g.: motor, IR, audio etc functions
- TuxDroid wireless daughter board – based on 1x Atmel ATmega48 and Atmel ATR2406 2.4-GHz ISM Transceiver (the exact same board is also in the TuxDroid Fish)
Schematics
Links
- Lots of code for the TuxDroid: https://github.com/joelmatteotti, e.g.: firmware
- https://www.tuxdroids.com/learn-more/
- Wikipedia article: https://en.wikipedia.org/wiki/Tux_Droid
- YouTube playlist: https://www.youtube.com/playlist?list=PLxZmfh4TBuS1nVkgj2jBe0wveSlaYfPr4&jct=lAHCmPOucB5GfuaPiO9b719vbZe-IQ