Esp32cam: Difference between revisions
Jump to navigation
Jump to search
(added link to video with simple guide) |
No edit summary |
||
| Line 9: | Line 9: | ||
== Introduction == | |||
It's an ESP32 board with a camera, running a web server, so it acts as an inexpensive webcam. | |||
== Hardware == | |||
* http://wiki.aithinker.com/esp32-cam | * http://wiki.aithinker.com/esp32-cam | ||
* [[bertrik]] ordered [https://aliexpress.com/item/ESP32-CAM/32947577882.html this board on AliExpress] | |||
== Software == | |||
* maybe https://github.com/m5stack/m5stack-cam-psram ? | |||
* https://github.com/donny681/ESP32_CAMERA_QR | * https://github.com/donny681/ESP32_CAMERA_QR | ||
* [https://youtu.be/q7Z_XnBYFhY Step by step video guide to getting it up and running with Arduino IDE and the Expressif CameraWebServer example] | * [https://youtu.be/q7Z_XnBYFhY Step by step video guide to getting it up and running with Arduino IDE and the Expressif CameraWebServer example] | ||
=== platformio === | |||
[[bertrik]] made an attempt to build the CameraWebServer example as a platformio project: https://github.com/bertrik/CameraWebServer | |||
To build the code, clone the git repo above, cd into it, then type | |||
pio run | |||
To upload it to the board: | |||
pio run -t upload | |||
To watch the debug output: | |||
pio device monitor | |||
Revision as of 22:58, 27 January 2019
| Project ESP32-CAM | |
|---|---|
| |
| Cheap webcams with Wifi, what could possibly go wrong? | |
| Status | Initializing |
| Contact | noopwafel, Sebastius |
| Last Update | 2019-01-27 |
Introduction
It's an ESP32 board with a camera, running a web server, so it acts as an inexpensive webcam.
Hardware
Software
- maybe https://github.com/m5stack/m5stack-cam-psram ?
- https://github.com/donny681/ESP32_CAMERA_QR
- Step by step video guide to getting it up and running with Arduino IDE and the Expressif CameraWebServer example
platformio
bertrik made an attempt to build the CameraWebServer example as a platformio project: https://github.com/bertrik/CameraWebServer
To build the code, clone the git repo above, cd into it, then type
pio run
To upload it to the board:
pio run -t upload
To watch the debug output:
pio device monitor