ArduinoBootloader: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Writing a bootloader to an 'empty' arduino or atmega: avrdude -p m328p -c usbasp -B 4 -U hfuse:w:0xda:m -U lfuse:w:0xff:m -U efuse:w:0x00:m avrdude -p m328p -c usbasp -U flash:...") |
No edit summary |
||
| Line 1: | Line 1: | ||
Use the programmer, found in the box of 'usbtinyisp'. Connect it with the 6-pin header to the ICSP on the arduino(nano) | |||
Writing a bootloader to an 'empty' arduino or atmega: | Writing a bootloader to an 'empty' arduino or atmega: | ||
Revision as of 19:58, 15 January 2013
Use the programmer, found in the box of 'usbtinyisp'. Connect it with the 6-pin header to the ICSP on the arduino(nano)
Writing a bootloader to an 'empty' arduino or atmega:
avrdude -p m328p -c usbasp -B 4 -U hfuse:w:0xda:m -U lfuse:w:0xff:m -U efuse:w:0x00:m
avrdude -p m328p -c usbasp -U flash:w:~/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex -U lock:w:0x0f:m