SpaceBlaster

From RevSpace
Revision as of 19:15, 20 November 2016 by Jelly (talk | contribs) (→‎Progress)
Jump to navigation Jump to search
Project SpaceBlaster
SpaceBlaster.jpg
Speaker soundsystem
Status Initializing
Contact Jelly
Last Update 2016-11-20

The SpaceBlaster is the ideal hackerspace portable speaker soundsystem. It's the competitor of the DeBASS and the DeCRASH.

Materials

  • 2*50 W digital amplifier board TPA3116D2 (two-channel)
  • C.H.I.P.
  • Arduino nano

Progress

20-11-2016

Stripped the main board of all transistors and other electronic components except the switches and potentiometers.

One tri-state switch has been connected, I will use two GPIO pins to detect in which state the switch (up, middle, down) is to save GPIO pins.

SpaceBlaster sp3t.jpg

Possible layout of the ARM board, arduino and amplifier.

Spaceblaster layout boards.jpg

Wago's are used on the other side for the ground / power to avoid cable clutter mess :)

Cable mgmt:

  • Blue cable => potentiometer
  • Black => Ground
  • Red => 5V

Spaceblaster wagos ftw.jpg

future plans

  • Battery powered / charging integrated
  • Subwoofer? Currently the speakers miss bass
  • Jack in for phones or bluetooth