PopcornMachine: Difference between revisions

From RevSpace
Jump to navigation Jump to search
Line 15: Line 15:


*. Turn on two switches.
*. Turn on two switches.
FOR 1911 ORIGINAL AND BUDWEISER ® POPPER: LIGHT (inside cabinet, top left) and
KETTLE/MOTOR (next to light switch).
FOR THEATRE AND CONTEMPO POP: POWER and KETTLE (located in chassis).
* Allow kettle to warm for approximately 5 minutes.
* Allow kettle to warm for approximately 5 minutes.
* Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus
* Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above the kettle.)
seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above
* While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at “out” position to aid in catching stray popcorn.
the kettle.)
*  Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
* While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at
“out” position to aid in catching stray popcorn.
*  Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour
remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
* Repeat steps 1-5 for additional batches.
* Repeat steps 1-5 for additional batches.
* Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may
* Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may remain ON to display and heat popcorn.
remain ON to display and heat popcorn.


== Hoe te schoonmaken ==
== Hoe te schoonmaken ==

Revision as of 15:50, 4 February 2018

Project Popcorn machine
PopcornMachine.jpg
Status Completed
Contact User:Gori
Last Update 2018-02-04

Technische details

Hoe popcorn maken

Uit de manual , zord zo nog aangepast :

  • . Turn on two switches.
  • Allow kettle to warm for approximately 5 minutes.
  • Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above the kettle.)
  • While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at “out” position to aid in catching stray popcorn.
  • Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
  • Repeat steps 1-5 for additional batches.
  • Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may remain ON to display and heat popcorn.

Hoe te schoonmaken