Door sign: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Project  
{{Project  
  |Name=Door sign
  |Name=Door sign
  |Status=Initializing
  |Status=Completed
  |Picture=
  |Picture=IMG_20180706_174558.jpg
  |Contact=User:Gori
  |Contact=User:Gori
  |Contact1=User:Thomas
  |Contact1=User:Thomas
  }}
  }}
Make a cooler revspace sign for about the door
= Finished product =
* https://revspace.nl/kiekjes/view/20180702/P1010323.JPG
* https://revspace.nl/kiekjes/view/20180702/P1010322.JPG
= Specs =
Sign must
* be 600x400 mm or enough to cover the ugly patch above the door
* be securely fastened and removeable
* leave no significant marks on  the building
* be awesome
= Technical design =
* 2mm [https://www.hego.nl/rvs-kwaliteiten-aisi-304/ 304 stainless] steel  plate, [http://images.linnlive.com/3e6336e0c39790bdb0c0c58c72f9f8a8/6c2967f2-bf0c-4212-b665-93836919da13.jpg 2B finish]
* 2  10x40x2 strips, riveted to the building, with 2x  3mm rvs screws , holing the plate to the building
* Use  Vinyl sticker as resist, also sticker the back and edges
* Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
* Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application!
= graphic design =
* [[Logo]]
* Letters area polished with rvs polishing paste and buffing wheel
* LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
* rest etched
= Gallery =
<gallery>
RevspaceignTest.JPG
File:P1010262.JPG
File:P1010257.JPG
File:P1010319.JPG
File:P1010320.JPG
File:IMG_20180706_174558.jpg
</gallery>

Latest revision as of 15:52, 6 July 2018

Project Door sign
IMG 20180706 174558.jpg
Status Completed
Contact User:Gori, User:Thomas
Last Update 2018-07-06


Make a cooler revspace sign for about the door

Finished product

Specs

Sign must

  • be 600x400 mm or enough to cover the ugly patch above the door
  • be securely fastened and removeable
  • leave no significant marks on the building
  • be awesome

Technical design

  • 2mm 304 stainless steel plate, 2B finish
  • 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
  • Use Vinyl sticker as resist, also sticker the back and edges
  • Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
  • Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application!


graphic design

  • Logo
  • Letters area polished with rvs polishing paste and buffing wheel
  • LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
  • rest etched

Gallery