Door sign: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Project |Name=Door sign |Status=Initializing |Picture= |Contact=User:Gori User:Thomas }}") |
(→Specs) |
||
(6 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
|Name=Door sign | |Name=Door sign | ||
|Status=Initializing | |Status=Initializing | ||
|Picture= | |Picture=RevspaceignTest.JPG | ||
|Contact=User:Gori User:Thomas | |Contact=User:Gori | ||
|Contact1=User:Thomas | |||
}} | }} | ||
Make a cooler revspace sign for about the door | |||
= Specs = | |||
Sign must | |||
* be 600x400 mm or enough to cover the ugly patch above the door | |||
* be securely fastened and removeable | |||
* leave no significant marks on the building | |||
* be awesome | |||
= Technical design = | |||
* 2mm [https://www.hego.nl/rvs-kwaliteiten-aisi-304/ 304 stainless] steel plate, [http://images.linnlive.com/3e6336e0c39790bdb0c0c58c72f9f8a8/6c2967f2-bf0c-4212-b665-93836919da13.jpg 2B finish] | |||
* 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building | |||
* Use Vinyl sticker as resist, also sticker the back and edges | |||
* Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | |||
= graphic design = | |||
* [[Logo]] | |||
* LED unpolished 2B surface, stained with Copper sulphate, to get a golden color. Will most likely patina to green over time. | |||
* Letters polished rvs | |||
* rest etched |
Revision as of 18:49, 17 June 2018
Project Door sign | |
---|---|
Status | Initializing |
Contact | User:Gori, User:Thomas |
Last Update | 2018-06-17 |
Make a cooler revspace sign for about the door
Specs
Sign must
- be 600x400 mm or enough to cover the ugly patch above the door
- be securely fastened and removeable
- leave no significant marks on the building
- be awesome
Technical design
- 2mm 304 stainless steel plate, 2B finish
- 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
- Use Vinyl sticker as resist, also sticker the back and edges
- Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
graphic design
- Logo
- LED unpolished 2B surface, stained with Copper sulphate, to get a golden color. Will most likely patina to green over time.
- Letters polished rvs
- rest etched