CubeCell

From RevSpace
Revision as of 00:50, 4 December 2019 by Bertrik Sikken (talk | contribs) (Created page with "== Intro == This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from heltec.org * based on an ASR605x (ARM cortex M0+ core) + SX1262 radio chip * lo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intro

This page is about the CubeCell board from heltec.org

  • based on an ASR605x (ARM cortex M0+ core) + SX1262 radio chip
  • low power, only microamps sleep current
  • battery connection
  • solar cell connection

the github page for the Arduino code

What I'd like to investigate:

  • Can we run the arduino-lmic core on this? This should be possible because arduino-lmic is also targeted to sx1262 core.
  • Can we compile the code with platformio? Currently this is not the case, you need the Arduino IDE...
 https://github.com/HelTecAutomation/ASR650x-Arduino/issues/11
 https://github.com/platformio/platformio-core/issues/3078