CC2540: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
Line 28: Line 28:
* [[:File:cc2540.pcap|Wireshark log]]
* [[:File:cc2540.pcap|Wireshark log]]
* [[:File:cc2540.psd|SmartRF packet sniffer log]]
* [[:File:cc2540.psd|SmartRF packet sniffer log]]
In the logs, I cannot see any firmware blobs being downloaded to the stick.
Probably the stick comes with a pre-loaded firmware of itself to do the BLE sniffing.
== Protocol ==
[[File:cc2540_settings.png|right|thumb]]
In the windows sniffer software, it seems there are only two things communicated:
* towards the stick: which radio channel to sniff
* from the stick: raw sniffed BLE frames

Revision as of 18:57, 15 November 2016

Project CC2540
Cc2540 webee.png
Making the CC2540 BLE dongle work
Status Initializing
Contact bertrik
Last Update 2016-11-15

Introduction

This page is about the CC2540 bluetooth low-energy sniffer dongle and getting it to work with Linux. A nice end result could be that it becomes possible to sniff directly in WireShark with this dongle.

I have such a "WeBee" dongle that can be found for about E15,- on websites like Aliexpress.

Analysis

USB descriptor

When plugging this stick into a Linux machine, you can see it uses only one bulk endpoint.

XXX

USB logs from Windows

This USB device does actually work with Windows:

I've captured a log of the communication over USB while the BLE is capturing bluetooth traffic from some iBeacon:

In the logs, I cannot see any firmware blobs being downloaded to the stick. Probably the stick comes with a pre-loaded firmware of itself to do the BLE sniffing.

Protocol

Cc2540 settings.png

In the windows sniffer software, it seems there are only two things communicated:

  • towards the stick: which radio channel to sniff
  • from the stick: raw sniffed BLE frames