From RevSpace
Revision as of 21:25, 15 January 2013 by Maxell (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Use the programmer, found in the box of 'usbtinyisp'. Connect it with the 6-pin header to the ICSP on the Arduino (Tested with Nano)

Writing a bootloader to an 'empty' Arduino or atmega:

avrdude -p m328p -c usbasp -B 4 -U hfuse:w:0xda:m -U lfuse:w:0xff:m -U efuse:w:0x00:m avrdude -p m328p -c usbasp -U flash:w:~/arduino/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex -U lock:w:0x0f:m