Packet radio

Project Packet radio
hoe meer elektromagnetische velden, hoe meer vreugd
Status	In progress
Contact	Flok420, Maxell
Last Update	2016-03-13

Fiddling with packet radio. The idea is to have a node/repeater/bbs/etc on 27mc. At revspace and at Flok's house (in Gouda).

Networking

Currently the rpi is connected to a gl-inet (owned by Flok). The gl-inet is a repeater for revspace-pub. The gl-inet has a port-forward to the rpi.

IP address of the gl-inet: 10.42.43.253.

RPI mac address: b8:27:eb:2b:a2:f9

Hardware

We have an TNC-PI which is a TNC connected to a Raspberry Pi interfaced to a Midland Alan 48 plus (27 MHz) radio. Every five (5) minutes it sends out a beacon of information about the setup and the request to report back any receptions. Any incoming packets are being logged to the disk. If an incoming packet appears to be an APRS packet, it should get digipeated.

settings for radio

Todo

• 5/8 golf antenne op sparkshack2
  • Antenne, tegelvoet met tegels en kabels al in huis
  • Anti-kabelsalade keuze: installatiekast
    • Hier een mooie aan uit knop op voor als de zender uit moet (maar rpi aan mag blijven)

• Add functionality
  • APRS iGate: send all incoming aprs packets to cbaprs.de
    • Direwolf sound card tnc?
  • BBS: fully featured BBS for chat/latest hacker news