Trimbleacutime: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Pin-out) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 4: | Line 4: | ||
|Picture=Azimutalprojektion.jpg | |Picture=Azimutalprojektion.jpg | ||
|Omschrijving=Just putting some info out there about these old gps timing modules | |Omschrijving=Just putting some info out there about these old gps timing modules | ||
|Status=Completed | |Status= Completed | ||
|Contact=thomas | |Contact=thomas | ||
}} | }} | ||
| Line 10: | Line 10: | ||
== Pin-out == | == Pin-out == | ||
I had some trouble figuring out how to connect one of these old receiver units to its interface box. The pinout turns out to be identical to the older Palisade units! I've listed the connections below, maybe it will | I had some trouble figuring out how to connect one of these old receiver units to its interface box. The pinout turns out to be identical to the older Palisade units! I've listed the connections below, maybe it will save someone else the trouble of plowing through endless documentation. | ||
{|class=wikitable | {|class=wikitable | ||
Latest revision as of 12:02, 23 February 2019
| Project Trimble Acutime 2000 | |
|---|---|
| |
| Just putting some info out there about these old gps timing modules | |
| Status | Completed |
| Contact | thomas |
| Last Update | 2019-02-23 |
Pin-out
I had some trouble figuring out how to connect one of these old receiver units to its interface box. The pinout turns out to be identical to the older Palisade units! I've listed the connections below, maybe it will save someone else the trouble of plowing through endless documentation.
| DB-25M | Acutime | Description |
|---|---|---|
| 1 | 1 | Power |
| 7 | 9 | Ground |
| 9 | 12 | PPS- |
| 10 | 8 | Transmit Port A (T-) |
| 11 | 4 | Transmit Port B (T-) |
| 12 | 7 | Receive Port A (R+) |
| 13 | 3 | Receive Port B (R+) |
| 21 | 11 | PPS + |
| 22 | 10 | Transmit Port A (T+) |
| 23 | 5 | Transmit Port B (T+) |
| 24 | 6 | Receive Port A (R-) |
| 25 | 2 | Receive Port B (R-) |
- Acutime pin numbers are those listed in the Trimble manual.