HAB Tracker Station

Project HAB Tracker Station
Status	In progress
Contact	User:Costyn_van_Dongen, Maxell, Bertrik_Sikken
Last Update	2013-04-09

Project page for the high altitude balloon tracking/listening station have set up in the space.

Overview

File:RevSpaceHABtracker.png

Done

Hardware

• "ezcap USB 2.0 DVB-T/DAB/FM" dongle (RTL2838U, Fitipower FC0013 tuner)
• VK5QI HABamp
• Raspberry Pi (+ power supply)
• Antenna: Diamond X-50N

Software

• Raspbian: revspace/geheim
  • IP: 10.42.43.20
  • SSH/Mosh: revspace/geheim
• running rtl_tcp on port 1234 (default)
  • Make sure you are on a wired connection, or else latency will ruin everything

Todo

Hardware

• Earth the antenna, to prevent static buildup
• Moar ferrite
• Metal box for some shielding (DIY or be lazy and get something like [1] or [2])

Software

• Replace the Raspberry Pi with the desktop.
  • We should make a nice metal(!) enclosure for the dongle and habamp first, to prevent going up there twice.

Pics

Derping around with hardware

• 
  One of the first payload tests
• 
• 
• 
  The antenna: 'Diamond X-50N'

Deel 1

• 
  Coax will leave/enter the building trough the little chimney
• 
  The ideal antenna mounting spot; the old zonnecollector
• 
  Enclosure almost ready to rock
• 
  The magic pipe
• 
  Almost the same as having the Raspi on the roof
• 
  Power and network connected
• 
• 
  Not sure what happened with the other hole there
• 
  The smell was't that bad
• 
  It pings!
• 
  The open pigtail even picks up our payload...

Deel 2

• 
  Without the HABamp the USB cable is a bit short
• 
  Coax entering
• 
  oh hi
• 
  Look at the beautiful stainless steel bolts!
• 
  Oooooh!
• 
• 
• 
  The beauty