LoRa-E5-mini

Project LoRa E5
Arduino on the LoRa-E5 module
Status	In progress
Contact	bertrik
Last Update	2021-10-08

The plan

This page is about the LoRa-E5 module and getting it to work as a LoRaWAN node with Arduino and the BasicMac stack.

• replace the original "AT" firmware with Arduino based firmware
• use the BasicMac library for LoRaWAN
• use platformio as the build system
• create some basic examples for use as a LoRaWAN node on TheThingsNetwork

Hardware

The hardware is the LoRa-E5 module from seeed studio: XXX

Seeed studio wiki page: https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/

Where can I find which pin of the microcontroller is connected to which pin of the LoRa RF module?

Software

https://github.com/bertrik/lora-e5