CJMCU-811

Uit RevSpace

Versie door Bertrik Sikken (overleg | bijdragen) op 30 dec 2018 om 00:49 (Created page with "{{Project |Name=CJMCU-811 |Picture=plaatje dat je geupload hebt op de wiki |Omschrijving=Playing around with a breakout board for the CSS-811 IC |Status=Initializing |Con...")
(wijz) ← Oudere versie | Huidige versie (wijz) | Nieuwere versie → (wijz)

Project CJMCU-811
350px
Playing around with a breakout board for the CSS-811 IC
Status Initializing
Contact bertrik
Last Update 2018-12-30

Introduction

I bought this breakout board from Aliexpress.

The CCS-811 is an air quality sensor chip by AMS.

Pins:

  • VCC connect this to 3.3V (!)
  • GND to ground obviously
  • SCL to ESP
  • SDA
  • WAK this needs to be low (!) in order for the chip to be active
  • INT can be left unconnected
  • RST can be left unconnected
  • ADD can be left unconnected

My board was apparently configured at I2C address 0x5A.