3d-printer-compare
From RevSpace
3D printer vergelijking
Besproken op de metameet van 13x05x2014. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.
| Mankati Fullscale XT | Cartesio W1CE | Lulzbot TAZ 4 | |
|---|---|---|---|
| Price | 2150 | 3600 | 2195 |
| PLA | Ja | x | Ja |
| ABS | Ja | x | Ja |
| PVA | Ja | x | Ja |
| Filament Diameter | 3mm | 3mm | 3mm |
| Filament Temp | 150 tot 250 Cel. | x | max 240 cel. |
| File support | stl, obj, gcode | x | |
| Max print speed | 180mm/sec | 150mm/sec | 200mm/sec |
| Precision | X,Y axis 0.0125 mm, Z axis 0.001 mm | 0,28 mm | 0,1 mm |
| Stepper Motor | X, Y 4248, 1.3A, Z 4263, 1.5A | x | x |
| Controller | Arduino Mega 2560 R3 | x | open source |
| Linux | Ja | x | Ja |
| Software | MankatiUM (Based on Cura) | x | x |
| Extruders | max 2 | max 4 | max 1 |
| Max. print afmetingen | 250×250×300 mm | 400x200x200 mm | 297x274x248 mm |
| Extrude Nozzle | 0,4 mm (0,3 en 0,5 beschikbaar) | x | 0.075mm to 0.35mm |
| Hot bed | Ja | x | Ja |
| Bed materiaal | Monocrystal glas | x | Borosilicate glass bed covered with PET film |
| Afgesloten | Ja | Ja | Nee |
| Afmetingen printer | 380x420x530mm | x | 680x520x515mm |
| Gewicht | 25kg | x | 11kg |
| Opmerkingen | x | Graveert ook | Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex |
| Link | http://www.mankati.com/fullscale-xt.html | http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled | https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer |
x = niet bekend
