Esp32cam
Jump to navigation
Jump to search
Project ESP32-CAM | |
---|---|
Cheap webcams with Wifi, what could possibly go wrong? | |
Status | Initializing |
Contact | noopwafel, Sebastius |
Last Update | 2019-01-29 |
Introduction
It's an ESP32 board with a camera, running a web server, so it acts as an inexpensive webcam.
Hardware
To flash the module, do not forget the jumper between pins IO0 and GND!
Software
- maybe https://github.com/m5stack/m5stack-cam-psram ?
- https://github.com/donny681/ESP32_CAMERA_QR
- Step by step video guide to getting it up and running with Arduino IDE and the Expressif CameraWebServer example
platformio
bertrik made an attempt to build the CameraWebServer example as a platformio project: https://github.com/bertrik/CameraWebServer
To build the code, clone the git repo above, cd into it, then type
pio run
To upload it to the board:
pio run -t upload
To watch the debug output:
pio device monitor
Platformio can be installed on a Debian Linux system as follows:
sudo apt-get install python-pip sudo pip install platformio pio upgrade