3d-printer-compare: verschil tussen versies

Uit RevSpace

← Oudere bewerkingNieuwere bewerking →
Semafoor (overleg | bijdragen)
126 bewerkingen
Toegevoegd wat onze eisen aan een 3D printer zijn
Semafoor (overleg | bijdragen)
126 bewerkingen
Geen bewerkingssamenvatting
Regel 29: Regel 29:
!Lulzbot TAZ 4
!Lulzbot TAZ 4
!Ultimaker II
!Ultimaker II
!Deltamaker
|-
|-
|Price
|Price
Regel 35: Regel 36:
|2195
|2195
|€ 2300 incl. BTW
|€ 2300 incl. BTW
|$ 2400
|-
|-
|PLA
|PLA
|YES
|YES
|x
|x
|YES
|YES
|YES
|YES
|YES
Regel 47: Regel 50:
|YES
|YES
|YES
|YES
|?
|-
|-
|PVA
|PVA
Regel 52: Regel 56:
|x
|x
|YES
|YES
|?
|?
|?
|-
|-
Regel 59: Regel 64:
|
|
|€ 38 - 42 (0.75 kg)
|€ 38 - 42 (0.75 kg)
|$ 39 (1 kg)
|-
|-
|Filament Diameter
|Filament Diameter
Regel 65: Regel 71:
|3 mm
|3 mm
|2.85 mm  
|2.85 mm  
|1.75 mm
|-
|-
|Filament Temp
|Filament Temp
Regel 71: Regel 78:
|max 240 °C
|max 240 °C
|180 - 260 °C
|180 - 260 °C
|
|-
|-
|File support
|File support
Regel 77: Regel 85:
|
|
|STL / OBJ / DAE / AMF
|STL / OBJ / DAE / AMF
|
|-
|-
|Print speed
|Print speed
Regel 83: Regel 92:
| -200 mm/s
| -200 mm/s
|30-300 mm/s
|30-300 mm/s
|
|-
|-
|Accuracy*
|Accuracy*
Regel 89: Regel 99:
|0,1 mm
|0,1 mm
|0.0125 mm (X,Y), 0.005 mm (Z)
|0.0125 mm (X,Y), 0.005 mm (Z)
|
|-
|-
|Stepper Motor*
|Stepper Motor*
Regel 95: Regel 106:
|x
|x
|x
|x
|
|-
|-
|Controller*
|Controller*
Regel 107: Regel 119:
|YES
|YES
|YES
|YES
|
|-
|-
|Software
|Software
Regel 113: Regel 126:
|x
|x
|Cura
|Cura
|Marlin, OctoPrint, Repetier Host, and Slic3r
|-
|-
|Extruders
|Extruders
Regel 119: Regel 133:
|max 1
|max 1
|
|
|1
|-
|-
|Max. print dimensions
|Max. print dimensions
Regel 125: Regel 140:
|297x274x248 mm
|297x274x248 mm
|230x225x205 mm
|230x225x205 mm
|254Øx278mm
|-
|-
|Extrude Nozzle
|Extrude Nozzle
|0,4 mm (0,3 en 0,5 beschikbaar)
|0,4 mm (0,3 en 0,5 beschikbaar)
|x
|?
|0.075mm to 0.35mm
|0.075mm to 0.35mm
|0.4 mm
|0.4 mm
|
|-
|-
|Hot bed
|Hot bed
Regel 137: Regel 154:
|YES
|YES
|50-100 °C
|50-100 °C
|
|-
|-
|Bed materiaal
|Bed materiaal
Regel 143: Regel 161:
|Borosilicate glass bed covered with PET film
|Borosilicate glass bed covered with PET film
|glass
|glass
|
|-
|-
|Closed printing area
|Closed printing area
Regel 149: Regel 168:
|Nee
|Nee
|closed sides, open front/top
|closed sides, open front/top
|No, completely open
|-
|-
|External dimensions
|External dimensions
Regel 155: Regel 175:
|680x520x515 mm
|680x520x515 mm
|492x342x558 mm (incl. filament)
|492x342x558 mm (incl. filament)
|
|-
|-
|Weight*
|Weight*
Regel 161: Regel 182:
|11kg
|11kg
|YES
|YES
|-
|-
|-
|Notes
|Notes
Regel 167: Regel 189:
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
|
|-
|-
|Link
|Link
Regel 173: Regel 196:
|https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer
|https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
|https://www.ultimaker.com/pages/our-printers/ultimaker-2
|http://www.deltamaker.com/
|}
|}


Versie van 23 jul 2014 11:50

3D printer vergelijking

Onze eisen

Parameter Value
Aanschafwaarde € ?
Minimum Maximum print dimensions ? x ? x ? mm
Usable materials ABS, PLA, ?
Surface roughness / print accuracy* better than 0.5 mm (at least!)

Mogelijke printers

Besproken op de MetaMeeting14x05x13. Eerste model (Mankati) is via Rix, tweede model (Carteso) zit in maasstricht en Lulzbot onbekend.

Mankati Fullscale XT Cartesio W1CE Lulzbot TAZ 4 Ultimaker II Deltamaker
Price 2150 3600 2195 € 2300 incl. BTW $ 2400
PLA YES x YES YES YES
ABS YES x YES YES ?
PVA YES x YES ? ?
Filament reel price (weight) € 38 - 42 (0.75 kg) $ 39 (1 kg)
Filament Diameter 3 mm 3 mm 3 mm 2.85 mm 1.75 mm
Filament Temp 150 tot 250 °C x max 240 °C 180 - 260 °C
File support stl, obj, gcode x STL / OBJ / DAE / AMF
Print speed -180 mm/s -150 mm/s -200 mm/s 30-300 mm/s
Accuracy* X,Y axis 0.0125 mm, Z axis 0.001 mm 0,28 mm 0,1 mm 0.0125 mm (X,Y), 0.005 mm (Z)
Stepper Motor* X, Y 4248, 1.3A, Z 4263, 1.5A x x x
Controller* Arduino Mega 2560 R3 x open source YES
Linux YES x YES YES
Software MankatiUM (Based on Cura) x x Cura Marlin, OctoPrint, Repetier Host, and Slic3r
Extruders max 2 max 4 max 1 1
Max. print dimensions 250×250×300 mm 400x200x200 mm 297x274x248 mm 230x225x205 mm 254Øx278mm
Extrude Nozzle 0,4 mm (0,3 en 0,5 beschikbaar) ? 0.075mm to 0.35mm 0.4 mm
Hot bed YES x YES 50-100 °C
Bed materiaal Monocrystal glass x Borosilicate glass bed covered with PET film glass
Closed printing area Ja Ja Nee closed sides, open front/top No, completely open
External dimensions 380x420x530 mm x 680x520x515 mm 492x342x558 mm (incl. filament)
Weight* 25kg x 11kg YES
Notes x Graveert ook Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex Open source hardware & software, print ook nylon, Laywood, Laybrick & Ninjaflex
Link http://www.mankati.com/fullscale-xt.html http://mauk.cc/webshop/systems/cartesio-assembled/Cartesio-w1ce-assembled https://www.lulzbot.com/products/lulzbot-taz-4-3d-printer https://www.ultimaker.com/pages/our-printers/ultimaker-2 http://www.deltamaker.com/

x = niet bekend

* = unreliable or irrelevant specification

Overgenomen van "https://revspace.nl/wiki/index.php?title=3d-printer-compare&oldid=5213"