Deur Opener v2: verschil tussen versies

Versie van 8 dec 2013 19:16

Open the door by using a linear actuator, which pulls down on the doorhandle from the inside
Control this using the 'doorduino' and a raspi for networking/ssh

@@ Regel 1: / Regel 1: @@
    {{Project
     |Name= Deuropener Versie 2
-    |Status=Initializing
+    |Status=Completed
-    |Contact= cfw
+    |Contact= board
    }}
-The door opening mechanism on the front door of "De Verlichting" needs a redesign.
+* Open the door by using a linear actuator, which pulls down on the doorhandle from the inside
+* Control this using the 'doorduino' and a raspi for networking/ssh
-It should be somewhat more durable (current mtbf is around 2 months) and the appearance could be improved.
-We invite participants to adopt this project.
-== Ideas area ==
-''Ideas regarding unlock mechanism:''
-# We've looked into a winch servo, but with the torque needed they are just as expensive as linear actuators
-# Linear actuators are a good option and could be "retrofitted", but still reasonably expensive.
-# How about something like this? [http://nl.aliexpress.com/item/ES-130A-130B-Narrow-type-Electric-Strike-Series/505735088.html Electric Strike]. Not as easy to install, however they are cheap, easy to operate and unlock the door instantly. (12V = unlocked, 0V = locked)