Bestand:ZX81+35 REV 4.0.pdf: verschil tussen versies
Uit RevSpace
New schematic which has the edge connector rotated 180 degrees, to correspond with the layout which has to get the same correction to correspond to the original ZX81 which has pin 1 on the left hand side (bottom side for the ZX81+35) also the edge conn... |
Addig to category |
||
| Regel 1: | Regel 1: | ||
New schematic which has the edge connector rotated 180 degrees, to correspond with the layout which has to get the same correction to correspond to the original ZX81 which has pin 1 on the left hand side (bottom side for the ZX81+35) | New schematic which has the edge connector rotated 180 degrees, to correspond with the layout which has to get the same correction to correspond to the original ZX81 which has pin 1 on the left hand side (bottom side for the ZX81+35) | ||
also the edge connector clock is now a permanent 3.25 MHz instead of simply the CPU clock (which can switch from 3.25 to 6.5MHz, which is a problem for the PSG. | also the edge connector clock is now a permanent 3.25 MHz instead of simply the CPU clock (which can switch from 3.25 to 6.5MHz, which is a problem for the PSG. [[Category:Pictures]] | ||
Huidige versie van 2 jul 2017 19:56
New schematic which has the edge connector rotated 180 degrees, to correspond with the layout which has to get the same correction to correspond to the original ZX81 which has pin 1 on the left hand side (bottom side for the ZX81+35) also the edge connector clock is now a permanent 3.25 MHz instead of simply the CPU clock (which can switch from 3.25 to 6.5MHz, which is a problem for the PSG.
Bestandsgeschiedenis
Klik op een datum/tijd om het bestand te zien zoals het destijds was.
| Datum/tijd | Afmetingen | Gebruiker | Opmerking | |
|---|---|---|---|---|
| huidige versie | 21 aug 2016 23:24 | (68 kB) | Mahjongg (overleg | bijdragen) | New schematic which has the edge connector rotated 180 degrees, to correspond with the layout which has to get the same correction to correspond to the original ZX81 which has pin 1 on the left hand side (bottom side for the ZX81+35) also the edge conn... |
U kunt dit bestand niet overschrijven.
Bestandsgebruik
Het volgende bestand is identiek aan dit bestand (meer details):
Geen enkele pagina gebruikt dit bestand.
