NurdPower: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
|Name=NurdPower | |Name=NurdPower | ||
|Picture=NurdPower.jpg | |Picture=NurdPower.jpg | ||
|Omschrijving=Power | |Omschrijving=Power consumption display | ||
|Status= | |Status=Stalled | ||
|Contact=bertrik | |Contact=bertrik | ||
}} | }} | ||
== Intro == | == Intro == | ||
Shows power | Shows power consumption (from MQTT) on a 7-segment display. | ||
TODO: | |||
* put it in a case | |||
* mount it somewhere | |||
== Hardware == | == Hardware == | ||
Wemos D1 mini connected to a TM1637 | Wemos D1 mini connected to a TM1637 4x7-segment display. | ||
Connections: | Connections: | ||
* display | * display VCC to Wemos 5V (3.3V also works with red LEDs) | ||
* display GND to Wemos GND | * display GND to Wemos GND | ||
* display DIO to Wemos D4 | * display DIO to Wemos D4 | ||
Latest revision as of 13:19, 11 May 2020
| Project NurdPower | |
|---|---|
| |
| Power consumption display | |
| Status | Stalled |
| Contact | bertrik |
| Last Update | 2020-05-11 |
Intro
Shows power consumption (from MQTT) on a 7-segment display.
TODO:
- put it in a case
- mount it somewhere
Hardware
Wemos D1 mini connected to a TM1637 4x7-segment display.
Connections:
- display VCC to Wemos 5V (3.3V also works with red LEDs)
- display GND to Wemos GND
- display DIO to Wemos D4
- display CLK to Wemos D3
Software
Source code is on github.
Basically it subscribes to the MQTT stream, receives power updates and displays them on the 7-segment display.
Uses the following libraries:
- TM1637 driver to set the digits.
- WifiManager
- PubSubClient