Door sign: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Project | {{Project | ||
|Name=Door sign | |Name=Door sign | ||
|Status= | |Status=Completed | ||
|Picture= | |Picture=IMG_20180706_174558.jpg | ||
|Contact=User:Gori | |Contact=User:Gori | ||
|Contact1=User:Thomas | |Contact1=User:Thomas | ||
| Line 9: | Line 9: | ||
Make a cooler revspace sign for about the door | Make a cooler revspace sign for about the door | ||
= Finished product = | |||
* https://revspace.nl/kiekjes/view/20180702/P1010323.JPG | |||
* https://revspace.nl/kiekjes/view/20180702/P1010322.JPG | |||
= Specs = | = Specs = | ||
| Line 22: | Line 27: | ||
* Use Vinyl sticker as resist, also sticker the back and edges | * Use Vinyl sticker as resist, also sticker the back and edges | ||
* Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | * Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray | ||
* Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application! | |||
= graphic design = | = graphic design = | ||
* [[Logo]] | * [[Logo]] | ||
* LED | * Letters area polished with rvs polishing paste and buffing wheel | ||
* LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour | |||
* rest etched | * rest etched | ||
= Gallery = | |||
<gallery> | |||
RevspaceignTest.JPG | |||
File:P1010262.JPG | |||
File:P1010257.JPG | |||
File:P1010319.JPG | |||
File:P1010320.JPG | |||
File:IMG_20180706_174558.jpg | |||
</gallery> | |||
Latest revision as of 15:52, 6 July 2018
| Project Door sign | |
|---|---|
| |
| Status | Completed |
| Contact | User:Gori, User:Thomas |
| Last Update | 2018-07-06 |
Make a cooler revspace sign for about the door
Finished product
- https://revspace.nl/kiekjes/view/20180702/P1010323.JPG
- https://revspace.nl/kiekjes/view/20180702/P1010322.JPG
Specs
Sign must
- be 600x400 mm or enough to cover the ugly patch above the door
- be securely fastened and removeable
- leave no significant marks on the building
- be awesome
Technical design
- 2mm 304 stainless steel plate, 2B finish
- 2 10x40x2 strips, riveted to the building, with 2x 3mm rvs screws , holing the plate to the building
- Use Vinyl sticker as resist, also sticker the back and edges
- Etch for 2 to 3 hours with 40% FeCl3, in a washing machine leak tray
- Watch out, if vinyl is cut well in advanced, likelihood of edges getting loose increases. This creates uneven edges when etching. Cut right before application!
graphic design
- Logo
- Letters area polished with rvs polishing paste and buffing wheel
- LED area heat treated with RVS wire wheel to get a brushed surface, then heat treated to golder colour
- rest etched
