Difference between revisions of "Traffic light"
Jump to navigation
Jump to search
(Created page with "Owner: Folkert van heusden Connected to jukebox. Device: /dev/tl Serial, 115k2, requires ascii-string ended with cr/lf/cr+lf/lf+rc/and other variations. 3 characters (not...") |
|||
| Line 2: | Line 2: | ||
Connected to jukebox. | Connected to jukebox. | ||
| + | |||
Device: /dev/tl | Device: /dev/tl | ||
| + | |||
Serial, 115k2, requires ascii-string ended with cr/lf/cr+lf/lf+rc/and other variations. | Serial, 115k2, requires ascii-string ended with cr/lf/cr+lf/lf+rc/and other variations. | ||
3 characters (not binary bytes) that are either 0 or 1. Order: green, yellow, red. | 3 characters (not binary bytes) that are either 0 or 1. Order: green, yellow, red. | ||
| + | |||
Arduino requires extra seperate power supply or else it'll go in a reboot-loop when switching. | Arduino requires extra seperate power supply or else it'll go in a reboot-loop when switching. | ||
Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin. | Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin. | ||
Revision as of 22:02, 25 September 2015
Owner: Folkert van heusden
Connected to jukebox.
Device: /dev/tl
Serial, 115k2, requires ascii-string ended with cr/lf/cr+lf/lf+rc/and other variations. 3 characters (not binary bytes) that are either 0 or 1. Order: green, yellow, red.
Arduino requires extra seperate power supply or else it'll go in a reboot-loop when switching.
Pinout: g/y/r are on pins 2/3/4. Brown is on 5V, blue on gnd. External power on gnd & vin.