Difference between revisions of "The First Cut"

From RevSpace
Jump to navigation Jump to search
Line 2: Line 2:
 
  |Name=The First Cut
 
  |Name=The First Cut
 
  |Date=2012-01-16
 
  |Date=2012-01-16
  |Info=This weekend at the eth0 winter event, we hooked up the laos laser controller board to the lasercutter and were able to cut our first tests. It went smoothly, and we are now installing the cutter in the space and working to extend the software to meet our needs
+
  |Info=This weekend at the eth0 winter event, we hooked up the laos laser controller board to the lasercutter and were able to cut our first tests. It went smoothly, and we are now installing the cutter in the space and working to extend the software to meet
 
  |Image=Laos-firstcrop-cut.jpg
 
  |Image=Laos-firstcrop-cut.jpg
 
  }}
 
  }}

Revision as of 16:38, 16 January 2012


2012-01-16 - This weekend at the eth0 winter event, we hooked up the laos laser controller board to the lasercutter and were able to cut our first tests. It went smoothly, and we are now installing the cutter in the space and working to extend the software to meet

Laos-firstcrop-cut.jpg

The lasercutter is initially funded in large part by two of our not-entirely-broke members, with additional donations from the HXX Foundation] and several other members. The lacercutter will be available to members and non-members alike for a small hourly fee to get the lenders their money (at least partly) back. The cutter needs a few final adjustments, but thanks to the [Laos laser] project it is already very easy to send your design to the cutter through a CUPS driver.

With acquiring the cutter, we can now implement a new currency: trollcoins. Small troll-face shaped coins will represent a value that is slightly proportional to the cost of making one such coin. The idea is that it will become ever cheaper to make these coins, resulting in hyper-deflation. We have heard this is essential for modern currency systems.