Difference between revisions of "SoilHumiditySensor"

From RevSpace
Jump to navigation Jump to search
(Hardware)
(Hardware)
Line 19: Line 19:
 
It got [https://nl.aliexpress.com/item/32882371718.html these capacitive ones] from Aliexpress.
 
It got [https://nl.aliexpress.com/item/32882371718.html these capacitive ones] from Aliexpress.
  
I've connected it up as follows:
+
I've connected it up to a Wemos D1 mini ESP8266 board, as follows:
 
* probe GND (black) to Wemos D1 mini pin D5
 
* probe GND (black) to Wemos D1 mini pin D5
 
* probe VCC (red) to Wemos D1 mini pin D0
 
* probe VCC (red) to Wemos D1 mini pin D0

Revision as of 16:47, 12 May 2019

Project SoilHumiditySensor
SoilHumiditySensor.png
Investigation of soil humidity sensors
Status In progress
Contact bertrik
Last Update 2019-05-12


Introduction

A number of types of soil humidity sensors exist. Many have the problem that the electrodes corrode.

For example, see this video by Andreas Spiess that compares a couple of types.

References

Hardware

It got these capacitive ones from Aliexpress.

I've connected it up to a Wemos D1 mini ESP8266 board, as follows:

  • probe GND (black) to Wemos D1 mini pin D5
  • probe VCC (red) to Wemos D1 mini pin D0
  • probe AOUT (yellow) to Wemos D1 mini pin A0

This way, all connections on the Wemos D1 are right next to each other and the wire with the 3-pin connector can simply be plugged into the Wemos D1 mini without having to modify the cable.

The software puts a low level on pin D5 (to emulate GND) and a high level on pin D0 (to emulate VCC). The idea is that the operating current of the probe is low enough for this trick to work.

I put heatshrink wrapping around the top part of the probe, to protect the electronics from moisture.

Software

See my github repository.

The software takes a measurement at a regular interval and sends it over MQTT.