Difference between revisions of "Smeltkroezen"

From RevSpace
Jump to navigation Jump to search
(Our crucibles)
 
(17 intermediate revisions by 2 users not shown)
Line 1: Line 1:
= Our crusibles
+
= Our crucibles =
 +
* several small graphite ones <50ml
 
* ~100ml graphite
 
* ~100ml graphite
* 200 ml SiC
+
* 200 ml [https://en.wikipedia.org/wiki/Silicon_carbide SiC] graphite
* 5.3 L Sic
+
* 2 x 400ml graphite
[[image:KroezenOpRevspace may2018.jpg | 300px]] [[image:KroezenOpRevspace boven may2018.jpg | 3oopx]]
+
* 5.3 L [https://en.wikipedia.org/wiki/Silicon_carbide Sic]
 +
[[image:KroezenOpRevspace may2018.jpg | 300px]] [[image:KroezenOpRevspace_boven_may2018.jpg | 300px]]
 +
 
 +
The seller of 5L crucible claims "Ze zijn geschikt voor het smelten van metaal tot 1100°C". Silicium Carbide ( SiC) crucibles all over the internet are all rated up to  1500-1600 °C. No reason to believe that ours is any different. As the seller is a art supply store,  I suspect this is a non-techie way of saying "Use only for non-ferrous metals", which is consistent advice for all for SiC crucibles. If you are serious about melting cast iron or steel, you probably know  what you are doing anyway ;)
  
 
= How to use crucibles =
 
= How to use crucibles =
...
+
* Liquid metal  is seriously dangerous. Do not YOLO this, it will hurt you.
 +
* Melting Aluminium? No, soda cans are NOT a good source of aluminium.
 +
** They may contain residual moisture, and can explode when dipped in molten metal.
 +
** They are covered in paint and coatings, and create a LOT of slag.
 +
* Do not pack/jam solid metal into the crucible! As it heats it will expand, and can crack the crucible.
 +
* After pouring metal, *always completely*  empty the crucible! Clean out as much slag as possible.
 +
* Keep dry, only store back into the samla when completely cooled off
 +
 
 +
 
 +
= Things to make =
 +
[[AluminiumBronze]]

Latest revision as of 10:17, 21 June 2018

Our crucibles

  • several small graphite ones <50ml
  • ~100ml graphite
  • 200 ml SiC graphite
  • 2 x 400ml graphite
  • 5.3 L Sic

KroezenOpRevspace may2018.jpg KroezenOpRevspace boven may2018.jpg

The seller of 5L crucible claims "Ze zijn geschikt voor het smelten van metaal tot 1100°C". Silicium Carbide ( SiC) crucibles all over the internet are all rated up to 1500-1600 °C. No reason to believe that ours is any different. As the seller is a art supply store, I suspect this is a non-techie way of saying "Use only for non-ferrous metals", which is consistent advice for all for SiC crucibles. If you are serious about melting cast iron or steel, you probably know what you are doing anyway ;)

How to use crucibles

  • Liquid metal is seriously dangerous. Do not YOLO this, it will hurt you.
  • Melting Aluminium? No, soda cans are NOT a good source of aluminium.
    • They may contain residual moisture, and can explode when dipped in molten metal.
    • They are covered in paint and coatings, and create a LOT of slag.
  • Do not pack/jam solid metal into the crucible! As it heats it will expand, and can crack the crucible.
  • After pouring metal, *always completely* empty the crucible! Clean out as much slag as possible.
  • Keep dry, only store back into the samla when completely cooled off


Things to make

AluminiumBronze