SMT stuff: Difference between revisions

From RevSpace
Jump to navigation Jump to search
(Created page with "Some helpful things/tools we have at the space for SMT work (with SMD components): == Components == There are tubs of sorted and unsorted SMD components above the soldering...")
 
(Redirected page to SMD Assembly)
Tag: New redirect
 
Line 1: Line 1:
#REDIRECT[[SMD Assembly]]
Some helpful things/tools we have at the space for SMT work (with SMD components):
Some helpful things/tools we have at the space for SMT work (with SMD components):



Latest revision as of 10:46, 10 March 2020

Redirect to:

Some helpful things/tools we have at the space for SMT work (with SMD components):

Components

There are tubs of sorted and unsorted SMD components above the soldering table in the main room. Our selection is a bit random/limited right now.

Tools

There is a Reflow Oven for reflow, a Hotair rework station, and a Preheater.

There are paint scrapers in noopwafel's samla (for now) for applying paste with a stencil. Don't use them for anything else!

Stencils

You can make stencils from Mylar using Lasercutter3. noopwafel had initial success using a 90% svg (only fill, no outline) from kicad, using speed 50, power 5, 0.02mm spacing, but probably there are smarter settings (thus: TODO).

Solder Paste

noopwafel has a 500g(!) tub of (lead-free) Loctite GC-10 T3 lead-free paste, usually kept in the fridge in the werkplaats. Feel free to use some, but please don't contaminate it (ask for help if needed). It is stable at room temperature and remains sticky for several hours.