Difference between revisions of "SAAndcard"
Jump to navigation
Jump to search
(Created page with "Soundcard (kit) for Arduino/Wemos boards based on a SAA1099 stereo soundchip. [http://pdf1.alldatasheet.com/datasheet-pdf/view/155677/ETC1/SAA1099.html SAA1099 datasheet]") |
|||
Line 1: | Line 1: | ||
− | Soundcard (kit) for Arduino/Wemos boards based on a SAA1099 stereo soundchip. | + | Soundcard (kit) for Arduino/Wemos boards based on a [http://pdf1.alldatasheet.com/datasheet-pdf/view/155677/ETC1/SAA1099.html SAA1099 stereo soundchip]. |
− | + | '''Compatible with:''' | |
+ | *Arduino Uno R3 | ||
+ | *Arduino Nano R3 | ||
+ | *Wemos D1 R2 | ||
+ | |||
+ | |||
+ | '''Specs:''' | ||
+ | *Stereo sound through SAA1099 chip | ||
+ | *Mono sound out of PWM pin of uC | ||
+ | *MIDI input, routed to RX or a standard I/O pin (use header for selecting which one) | ||
+ | *TTL serial on 3 pin header (MIDI can use RX) | ||
+ | *3,5mm jack output | ||
+ | *SPI is used for sending the data to the soundchip via a 74HCT595 | ||
+ | *The output, clock and latch of the shift register are available on a pin header. | ||
+ | |||
+ | More after I have received, populated and tested the PCBs. |
Revision as of 14:35, 14 September 2017
Soundcard (kit) for Arduino/Wemos boards based on a SAA1099 stereo soundchip.
Compatible with:
- Arduino Uno R3
- Arduino Nano R3
- Wemos D1 R2
Specs:
- Stereo sound through SAA1099 chip
- Mono sound out of PWM pin of uC
- MIDI input, routed to RX or a standard I/O pin (use header for selecting which one)
- TTL serial on 3 pin header (MIDI can use RX)
- 3,5mm jack output
- SPI is used for sending the data to the soundchip via a 74HCT595
- The output, clock and latch of the shift register are available on a pin header.
More after I have received, populated and tested the PCBs.