RevSmoker: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
No edit summary
Line 20: Line 20:
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
 
== Parts ==
=== Mechanical and electrical parts ===
=== Mechanical ===
==== Have ====
* steel drum that used to hold pineapple juice
* steel drum that used to hold pineapple juice
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L
* a wood chip box needs to be created
 
==== Need ====
* a wood chip box
** square is easy / round can hold more wood
**  needs to be created
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
* one or two grids to hold the dead animal parts being smoked
* one or two grids to hold the dead animal parts being smoked
* a cover with a handle
** Yotson may have hole steel plates
* 3 or 4 handles for top/side
* a BBQ thermometer in through the lid
* a BBQ thermometer in through the lid


=== Electronic parts ===
=== Electronic parts ===
Line 43: Line 51:
* a turn knob to adjust the temp
* a turn knob to adjust the temp
* a weather proof box to hold the electronics
* a weather proof box to hold the electronics
 
* rgb blinkelights


=== Specs and datasheets ===
=== Specs and datasheets ===

Revision as of 21:33, 15 February 2013

Project RevSmoker
Status Starting build"Starting build" is not in the list (Proposed, Initializing, In progress, Completed, Stalled, Abandoned) of allowed values for the "Project Status" property.
Contact User:Gori
Last Update 2013-02-15

What

Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker. While the BigGreenEggBBQ can act as a smoker as well, it has a fairly limited capacity. Furhtermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

Design

The idea is to use a steel drum to build something like this but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :

Parts

Mechanical

Have

  • steel drum that used to hold pineapple juice
    • Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

Need

  • a wood chip box
    • square is easy / round can hold more wood
    • needs to be created
    • Bonus point if the wood chip box can be retrieved from the side through a drawer or door
  • one or two grids to hold the dead animal parts being smoked
    • Yotson may have hole steel plates
  • 3 or 4 handles for top/side
  • a BBQ thermometer in through the lid


Electronic parts

Have

  • an industrial grade brass thermocouple probe keeping track of the temp.
    • needs calibration
    • ask benadski for the type and specs
  • an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
  • a square gourmet set heater element

Need

  • a 220V relay
  • weather proofed power socket enclosure
  • a turn knob to adjust the temp
  • a weather proof box to hold the electronics
  • rgb blinkelights

Specs and datasheets

  • alternative to the large sensor - a TMP36 temp sensor
  • SED1531LCD display to show the current / target temp

Software parts