Difference between revisions of "RevSmoker"

From RevSpace
Jump to navigation Jump to search
(Created page with "{{Project |Name=RevSmoker |Status=Initializing |Contact=User:Gori }} == What == Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a n...")
 
m
 
(29 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{Project  
 
{{Project  
 
  |Name=RevSmoker
 
  |Name=RevSmoker
  |Status=Initializing
+
  |Status=Abandoned
 
  |Contact=User:Gori
 
  |Contact=User:Gori
 
  }}
 
  }}
 
+
'''Smoker was thrown out recently due to lack of time and interest.'''
 
== What ==
 
== What ==
 
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
 
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
While the  [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furhtermore, it can not be electrically operated, which makes temperature control more tricky.
+
While the  [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furthermore, it can not be electrically operated, which makes temperature control more tricky.
  
 
So enter RevSmoker.
 
So enter RevSmoker.
  
 
== Design ==
 
== Design ==
The idea is to use a steel drum to build something like [[http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this]
+
The idea is to use a steel drum to build something like [http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this] but over 9000 times cooler, with electronics and blinkenlights.
  
Mechanical parts - must have :
+
The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach  a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the  heater/wood box to be can be easily removed for refilling, without removing the smoked items.
 +
 
 +
Design inspiration :
 +
* [http://cruftbox.com/cruft/docs/elecsmoker.html Trashcan smoker]
 +
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
 +
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
 +
== Parts ==
 +
=== Mechanical ===
 +
==== Have ====
 
* steel drum that used to hold pineapple juice
 
* steel drum that used to hold pineapple juice
* a electrical stove, for heating the wood chips
+
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L
 +
 
 +
==== Need ====
 
* a wood chip box
 
* a wood chip box
 +
** square is easy / round can hold more wood
 +
**  needs to be created
 +
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
 
* one or two grids to hold the dead animal parts being smoked
 
* one or two grids to hold the dead animal parts being smoked
* a cover with a handle
+
** Yotson may have hole steel plates
 +
* 3 or 4 handles for top/side
 +
* a BBQ thermometer in through the lid
  
Electronic parts
+
 
* a thermometer keeping track of the temp.
+
 
* an arduino to measure the temperature, display it on a small LCD screen and  control the heater suing a relay
+
=== Electronic parts ===
 +
==== Have ====
 +
* an industrial grade brass thermocouple probe keeping track of the temp.  
 +
** needs calibration
 +
** ask benadski for the type and specs
 +
* an arduino to measure the temperature, display it on a small LCD screen and  control the heater using a relay
 +
* a square gourmet set heater element
 +
 
 +
==== Need ====
 
* a 220V relay
 
* a 220V relay
* a TMP36  [[https://www.sparkfun.com/products/10988 temp sensor]
+
* weather proofed power socket enclosure
 +
* a turn knob to adjust the temp
 +
* a weather proof box to hold the electronics
 +
* rgb blinkelights
 +
 
 +
=== Specs and datasheets ===
 +
* alternative to the large sensor - a TMP36  [https://www.sparkfun.com/products/10988 temp sensor]
 +
*  SED1531LCD display to show the current / target temp
 +
** [https://dl.dropbox.com/u/11255141/display_info.pdf LCD datasheet]
 +
 
 +
=== Software parts ===
 +
* [http://playground.arduino.cc//Code/PIDLibraryRelayOutputExample PID library relay control example]
 +
** [https://www.dropbox.com/s/setane1i2pk1y1h/glcd.txt example code]
 +
** [http://marcovannoord.com/lcd/index.php?title=Hoofdpagina LCD wiki]
 +
 
 +
== Gallery ==
 +
<gallery>
 +
Image:Handles.jpg| The handles. And yes, that is the carcass of a generic PS/2 ball mouse. ;)
 +
Image:RevSmokerTropiFreeze.JPG| TropiFreeze, Smokin' good pineaple juice!
 +
Image:RevSmokerSparks.JPG|Sparks! At the SparkShack? What a surprise! ;)
 +
Image:RevSmokerHeatingElement.JPG| The heating element is  an  old gourmet set, inside-out.
 +
Image:RevSmokerMoulinex.jpg|The heating element donor.
 +
Image:RevSmokerPCICardBrackets.JPG| Brackets, PCI slot covers.
 +
Image:RevSmokerSpecs.JPG| Yep, there used to be frozen pineaple from Costa Rica in there once.
 +
Image:SparkShack.jpg| Plaats delict.
 +
Image:RevSmoker_BicycleWheelGrinding.JPG
 +
Image:RevSmoker_Handle.JPG| Double click to open.
 +
Image:RevSmoker_WheelRacks.JPG
 +
Image:RevSmoker_Bottom.JPG
 +
Image:RevSmoker_Whole.JPG
 +
Image:Revsmoker-first-run.jpg
 +
</gallery>

Latest revision as of 15:23, 6 August 2016

Project RevSmoker
Status Abandoned
Contact User:Gori
Last Update 2016-08-06

Smoker was thrown out recently due to lack of time and interest.

What

Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker. While the BigGreenEggBBQ can act as a smoker as well, it has a fairly limited capacity. Furthermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

Design

The idea is to use a steel drum to build something like this but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :

Parts

Mechanical

Have

  • steel drum that used to hold pineapple juice
    • Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

Need

  • a wood chip box
    • square is easy / round can hold more wood
    • needs to be created
    • Bonus point if the wood chip box can be retrieved from the side through a drawer or door
  • one or two grids to hold the dead animal parts being smoked
    • Yotson may have hole steel plates
  • 3 or 4 handles for top/side
  • a BBQ thermometer in through the lid


Electronic parts

Have

  • an industrial grade brass thermocouple probe keeping track of the temp.
    • needs calibration
    • ask benadski for the type and specs
  • an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
  • a square gourmet set heater element

Need

  • a 220V relay
  • weather proofed power socket enclosure
  • a turn knob to adjust the temp
  • a weather proof box to hold the electronics
  • rgb blinkelights

Specs and datasheets

  • alternative to the large sensor - a TMP36 temp sensor
  • SED1531LCD display to show the current / target temp

Software parts

Gallery