RevRadio: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
Line 3: Line 3:
  |Status=In progress
  |Status=In progress
  |Contact=User:Bertrik_Sikken
  |Contact=User:Bertrik_Sikken
|Contact=User:Maxell
}}
}}


Line 70: Line 71:
* Teamviewer, ID: 675540724
* Teamviewer, ID: 675540724
* VNC: geheim ;-)
* VNC: geheim ;-)
=== Running projects ===
== AIS decoding ==
* COAA's shipplotter to APRS.fi
* [http://aprs.fi/info/i/RevSpace Our APRS.fi page]
* [http://aprs.fi/#!call=i%2FRevSpace&v=heard Heatmap of received ships]


== TODO ==
== TODO ==
Stuff we are still planning to do:
Stuff we are still planning to do:
* wait for proper cables for the ham-it-up
* <strike>wait for proper cables for the ham-it-up</strike>
* think about an antenna for HF
* think about an antenna for HF

Revision as of 00:28, 29 September 2013

Project RevRadio
Status In progress
Contact User:Maxell
Last Update 2013-09-29

Introduction

Roof is looking much better now

This project consists of several small sub-projects related to radio reception at RevSpace. Reception is based (so far) on DVB-T dongles using an RTL2832 chip to do SDR (software-defined-radio).

Hardware

HF (0 - 30 MHz)

To receive signals from the relatively low frequency "HF" band, we have a ham-it-up board. The ham-it-up converts signals from 0-30 MHz up to 125-155 MHz, this makes is possible to use an RTL2832-based dongle to receive them.

Things that can be received with this setup:

  • morse and rtty beacons;
  • amateur radio voice;
  • amateur radio SSTV (slow-scan TV);
  • number stations such as the buzzer;
  • commercial AM broadcasts
  • etc.

Stuff we should can implement

  • Put it in a box!
  • Experiment with different (home made) antennas such as the mini whip
  • Hooking it up to our main SDR computer. Requires antenna on the roof

Generic VHF/UHF (24 - 1700 MHz)

Still installing

For generic radio reception in the VHF/UHF bands, we have a setup consisting of a discone antenna (ICOM AH-7000) on the roof of RevSpace and an RTL2832 dongle (R820T tuner). A simple filter (1/4 wave open stub) has been built to suppress very strong pager signals.

Things that can be received with this setup:

  • Citizens Band radio, 27 MHz
  • 10 meter amateur band, 28-29.7 MHz
  • 4 meter amateur band, 70-70.5 MHz
  • broadcast FM stereo, 88-108 MHz;
  • air traffic (voice);
  • P2000 paging traffic at 169.650 MHz;
  • weather images from the NOAA-15/18/19 weather satellites, at around 137 MHz;
  • APRS traffic;
  • weather info from weather balloons, at 400-410 MHz;
  • ads-b/mode-s airplane transponders, at 1090 MHz
  • etc.

Todo:

  • Get rid of the massive broadcast FM band, it's worth the trade between doing FM DX and broadcast FM noise.

HAB tracker (434-435 MHz)

The colinear

For tracking high-altitude balloons, we have a setup consisting of a Diamond X-50N antenna on the roof of RevSpace, a so-called hab-amp (bandpass filter for 430-440 MHz and low noise amplifier) and an RTL2832 dongle (FC0013 tuner). For more information, see the dedicated page at HAB_Tracker_Station

Things that can be received with this setup:

  • The complete 70 cm amateur band, 430-440 MHz
  • 70 cm ISM band, ~433 Mhz
  • high-altitude balloons, see spacenear tracker

Software

Currently one PC is dedicated to radio reception, called "habtracker". To start the PC:

  • Windows XP, hostname "habtracker", IP 10.42.44.94 (MAC 00:21:70:02:62:0f)
  • Start the machine with a magic WoL packet: 'wakeonlan -i 10.42.255.255 00:21:70:02:62:0f; ping habtracker'

Remote control

The PC can be remotely controlled as follows:

  • Teamviewer, ID: 675540724
  • VNC: geheim ;-)

Running projects

AIS decoding

TODO

Stuff we are still planning to do:

  • wait for proper cables for the ham-it-up
  • think about an antenna for HF