PopcornMachine: Difference between revisions

From RevSpace
Jump to navigation Jump to search
Line 14: Line 14:
Uit de manual , zord zo nog aangepast :
Uit de manual , zord zo nog aangepast :


1. Turn on two switches.
*. Turn on two switches.
FOR 1911 ORIGINAL AND BUDWEISER ® POPPER: LIGHT (inside cabinet, top left) and
FOR 1911 ORIGINAL AND BUDWEISER ® POPPER: LIGHT (inside cabinet, top left) and
KETTLE/MOTOR (next to light switch).
KETTLE/MOTOR (next to light switch).
FOR THEATRE AND CONTEMPO POP: POWER and KETTLE (located in chassis).
FOR THEATRE AND CONTEMPO POP: POWER and KETTLE (located in chassis).
2. Allow kettle to warm for approximately 5 minutes.
* Allow kettle to warm for approximately 5 minutes.
3. Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus
* Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus
seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above
seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above
the kettle.)
the kettle.)
4. While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at
* While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at
“out” position to aid in catching stray popcorn.
“out” position to aid in catching stray popcorn.
5. Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour
Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour
remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
6. Repeat steps 1-5 for additional batches.
* Repeat steps 1-5 for additional batches.
7. Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may
* Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may
remain ON to display and heat popcorn.
remain ON to display and heat popcorn.


== Hoe te schoonmaken ==
== Hoe te schoonmaken ==

Revision as of 15:49, 4 February 2018

Project Popcorn machine
PopcornMachine.jpg
Status Completed
Contact User:Gori
Last Update 2018-02-04

Technische details

Hoe popcorn maken

Uit de manual , zord zo nog aangepast :

  • . Turn on two switches.

FOR 1911 ORIGINAL AND BUDWEISER ® POPPER: LIGHT (inside cabinet, top left) and KETTLE/MOTOR (next to light switch). FOR THEATRE AND CONTEMPO POP: POWER and KETTLE (located in chassis).

  • Allow kettle to warm for approximately 5 minutes.
  • Place one measure of oil in kettle (1/3 cup). Immediately add one measure of raw popcorn (8 oz.) plus

seasoning salt. Pull lid closed to prevent stray kernels. (Lid is held in place by magnet directly above the kettle.)

  • While corn is popping, keep front operator doors slightly ajar to prevent fogging. Keep hopper door at

“out” position to aid in catching stray popcorn.

  • Allow corn to pop until popping ceases, usually when 3-4 seconds lapse between pops. Then pour

remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.

  • Repeat steps 1-5 for additional batches.
  • Turn KETTLE switch to OFF position when finished preparing popcorn; POWER or LIGHT switch may

remain ON to display and heat popcorn.

Hoe te schoonmaken