Plasma Cutting Table: Difference between revisions

From RevSpace
Jump to navigation Jump to search
(Created page with " <gallery> Plasmacut_table_1.JPG Plasmacut_table_2.JPG Plasmacut_table_3.JPG Plasmacut_table_4.JPG Plasmacut_table_5.JPG Plasmacut_table_6.JPG Plasmacut_table_7.JPG Plasmacut_tab...")
 
m (Add picture)
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Project
|Name=Plasmasnijder
|Status=Completed
|Picture=Plasmacut_table_1.JPG
|Contact=User:Gori
}} __NUMBEREDHEADINGS__
== Plasma cutting table ==
This table is meant for cutting sheet metal with a plasma cutter (or any other tool). The main feature is that it suspend the work metal by the edges, allowing free access to the bottom of the material. You can also use it with a Jigsaw (Decupeerzaag) to hold large sheets.
When using it with the plasma cutter, *DO NOT FORGET* to put the steel plates below it to capture the sparks.
*TODO Gori :  Add photo of the steel trays


<gallery>
<gallery>
Plasmacut_table_1.JPG
Image:Plasmacut_table_1.JPG
Plasmacut_table_2.JPG
Image:Plasmacut_table_2.JPG
Plasmacut_table_3.JPG
Image:Plasmacut_table_3.JPG
Plasmacut_table_4.JPG
Image:Plasmacut_table_4.JPG
Plasmacut_table_5.JPG
Image:Plasmacut_table_5.JPG
Plasmacut_table_6.JPG
Image:Plasmacut_table_6.JPG
Plasmacut_table_7.JPG
Image:Plasmacut_table_7.JPG
Plasmacut_table_8.JPG
Image:Plasmacut_table_8.JPG
</gallery>
</gallery>

Latest revision as of 19:30, 10 December 2017

Project Plasmasnijder
Plasmacut table 1.JPG
Status Completed
Contact User:Gori
Last Update 2017-12-10

__NUMBEREDHEADINGS__

Plasma cutting table

This table is meant for cutting sheet metal with a plasma cutter (or any other tool). The main feature is that it suspend the work metal by the edges, allowing free access to the bottom of the material. You can also use it with a Jigsaw (Decupeerzaag) to hold large sheets.

When using it with the plasma cutter, *DO NOT FORGET* to put the steel plates below it to capture the sparks.

  • TODO Gori : Add photo of the steel trays