Plasma Cutting Table: Difference between revisions

From RevSpace
Jump to navigation Jump to search
No edit summary
m (Add picture)
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Project
  |Name=Plasmasnijder
  |Name=Plasmasnijder
  |Status=Completed
  |Status=Completed
|Picture=Plasmacut_table_1.JPG
  |Contact=User:Gori
  |Contact=User:Gori
  }} __NUMBEREDHEADINGS__
  }} __NUMBEREDHEADINGS__
[[Image:Plasmacut_table_1.JPG|thumb|300px]]


== Plasma cutting table ==
== Plasma cutting table ==


This table is meant for cutting sheet metal with a plasma cutter (or any other tool). The main feature is that it suspend the work metal by the edges, allowing free access to the bottom of the material. You can also use if with a Jigsaw (Decupeerzaag).  
This table is meant for cutting sheet metal with a plasma cutter (or any other tool). The main feature is that it suspend the work metal by the edges, allowing free access to the bottom of the material. You can also use it with a Jigsaw (Decupeerzaag) to hold large sheets.  
   
   
When using it with the plasma cutter, *DO NOT FORGET* to put the steel plates below it to capture the sparks.
*TODO Gori :  Add photo of the steel trays
<gallery>
<gallery>
Image:Plasmacut_table_1.JPG
Image:Plasmacut_table_1.JPG

Latest revision as of 19:30, 10 December 2017

Project Plasmasnijder
Plasmacut table 1.JPG
Status Completed
Contact User:Gori
Last Update 2017-12-10

__NUMBEREDHEADINGS__

Plasma cutting table

This table is meant for cutting sheet metal with a plasma cutter (or any other tool). The main feature is that it suspend the work metal by the edges, allowing free access to the bottom of the material. You can also use it with a Jigsaw (Decupeerzaag) to hold large sheets.

When using it with the plasma cutter, *DO NOT FORGET* to put the steel plates below it to capture the sparks.

  • TODO Gori : Add photo of the steel trays